ISSUED:09-08-07 SHEET #: 202-9199-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
8 of 9
Slide the vertical brackets (
L
) along the c-channels of the adapter bracket (
K
) until the slots on the back of the
vertical brackets (
L
) are aligned to the holes on the back of screen. Fully tighten the four 10-32 x 3/8" socket pin
serrated screw head (
M
) which hold the vertical brackets (
L
) to the c-channels. Refer to the accompanying screen
compatibility chart to determine the proper fasteners to use. Attach the assembled adapter bracket to the back of
the screen using screws, upper and lower spacers as pictured. Verify that all holes are properly aligned, then use
the security allen wrench (
N
) to tighten the screws.
Note:
See figure 6 below for slot sizes.
Example:
For a Toshiba model 50 HP82 50" screen, attach the vertical brackets (L) to the screen using eight
M4 x 10 mm serrated socket pin screws or M5 x 12 mm socket pin screws through the small slots on the vertical
brackets (L). Please refer to the corresponding configuration note for more details. Upper spacers are required for
this configuration.
6
fig. 6
Mounting Slots
SMALL SLOTS ARE USED
FOR M4 AND M5 SCREWS.
LARGE SLOTS ARE USED
FOR M6 AND M8 SCREWS.
SCREWS
UPPER SPACERS
LOWER SPACERS
C -CHANNEL
K
MOUNTING SLOTS:
LARGE
MOUNTING SLOTS:
SMALL
L
M
Installation of Screen to Flat Panel Straight Column Mount