Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
7
of
9
ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05
H
I
B
J
K
M
L
N
N
G
T
Jumbo mount shown with optional ceiling plate/wall arm accessories.
FIRST:
From the top fully thread flush mount tube (
N
) into threaded fitting in wall arm or ceiling plate. Install the
wall arm or ceiling plate according to instructions included with it.
NEXT:
Attach right and left tilt brackets (
H
&
I
) to horizontal support (
G
) using four screw/washer combos (
T
).
Before tightening screws make sure tilt brackets are adjusted horizontally to align precisely with screws in the
side of vertical support arms (
B
). Attach horizontal support (
G
) to wall arm or ceiling plate using fiber washers (
J
&
L
), spacer (
M
, only included with smaller models) and retaining collar (
K
).
IMPORTANT:
Retaining collar (
K
)
requires a safety screw (
W
) [refer to DETAIL 3, page 8].
FINALLY:
Be sure that hooks in right and left tilt brackets (
H & I
) are open end forward. Hang the TV / bracket
assembly.
Insert one screw/washer combo (
T
) through slot in each tilt bracket (
H & I
). Hand tighten.
N
W
