Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
5
of
9
ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05
Pump ratchet handle to tighten belt. For secure
hold, ratchet reel must have at least two layers of
belt around it.
Note:
Too many layers of belt around ratchet reel
will cause it to jam. To avoid this problem be sure to
remove ALL slack from belt before pumping ratchet
handle.
After belt is tight, close ratchet handle.
To release, compress release bar and open ratchet
handle 180°.
Wrap belt around TV or monitor and mounting
surface. Insert end of belt through ratchet reel
and pull until ALL slack is out of belt.
release bar
ratchet
handle
belt
belt
Insert belt under,
behind, then through
ratchet reel.
ratchet reel
Position TV on support tray (
A
), thread belt through slots in top
clamps (
E
). Secure TV with belt as directed in
detail 1, 2 & 3
.
B
A
Safety belt, ACC 666 (Sold Separately), required for OSHPD approved installation.
Use of this belt is optional for all other installations.
E
E
Optional safety belt ACC 666 (required for OSHPD approved
installation) sold separately.
Thread belt between support arms (
B
) and anti-rollout hooks (
C
),
and between support arms (
B
) and support tray (
A
).
A
B
C
belt
belt
C
B
belt
belt
detail 1
detail 2
detail 3
belt
