10 of 35
ISSUED: 02-25-11 SHEET #: 009-9048-2 05-14-11
Mounting Flat Panel Display
Tilt Adjustment
Remove M8 nut and M8 washer from rear of universal
adapter plate (
B
). Hook universal adapter plate (
B
) onto
column assembly.
Secure universal adapter plate to column assembly by
reinstalling M8 nut and M8 washer as shown in detail 5.
7
Adjust tension knobs on sides of mount to desired
tension to enable tilt adjustment and balance your
display size and weight. Push or pull from top or
bottom of display to adjust tilt as shown. The tilt
can be adjusted to a maximum of 15°.
Retighten tension knob.
8
• Always use an assistant or mechanical lifting equipment to safely lift and position the display.
WARNING
TENSION KNOB
B
A
DETAIL 5
M8 NUT
M8 WASHER
