-22
-12
-30
-18
OFF
ON
PROCESS
-15
AMCL-2
Controller & Limiter
Automatic Multiband
-15
.15
-4
.25
dB
INPUT
0
-2
.2
-8
-10
-6
.4
4
6.5
sec
RELEASE
7
2.5
1
1.3
1.5
-3
LIMITING (dB)
-9
-12
-6
0
POWER
User’s Manual
AMCL2
SOUND REINFORCEMENT
ACOUSTIC RESEARCH
CONTROLLED RADIATION
3
3. WARRANTY
Peecker Sound
products are guaranteed against malfunction due to
defective materials or workmanship for a specified period of time, starting
from the date of original purchase. Should a malfunction occur during
the warranty period, the product will be repaired or replaced (at the
manufacturer’s discretion) free of charge. The shipping costs and related
risks, and any loss during shipment to authorized service centres are the
responsibility of the customer. The product will be returned to the customer
with a carriage forward shipment.
Warranty terms
The warranty covers the appliance under its initial purchase in compliance
with the laws in force. The warranty is valid for
3 years
, starting from the date
of receipt of the product. Peecker Sound reserves the right, in certain cases, to
decide to replace the appliance with another identical or similar product. The
warranty is not extended following a product failure. The warranty does not
cover any incidental or consequential damages, without limitation, caused to
persons or property during any period of inefficiency of the appliance.
Exclusions and limitations
The warranty does not apply to:
• any damage to exterior finishings or surfaces, aesthetic elements, or electric/
electronic parts resulting from negligent use of the product;
• malfunction resulting from incorrect or improper use of the product or from
transport without due care;
• malfunction resulting from repairs carried out by unauthorized persons or
service centres;
• malfunction due to circumstances that cannot be ascribed to manufacturing
defects of the appliance;
• plastic or glass parts, bulbs and the like, as well as all that can be regarded
as normal wear and tear. As regards circuit components (transistors, diodes,
etc.) the general terms set by the original manufacturers apply.
The following are also not covered by the warranty:
• damage caused by accidents, product modifications, negligence or
incorrect connection
• damage that occurred during transport
• damage resulting from failure to comply with the instructions contained in
the user’s manual
• claims based on misrepresentations by the seller and any product whose
serial number has been rubbed off, modified or removed.
Receiving warranty service
To receive repair or replacement of the product under warranty, the customer
must deliver the product in its original packaging carriage paid to an
authorized Peecker Sound service centre together with the relevant proof of
purchase, i.e. bill of sale, receipt or invoice.
The warranty service and list of authorized service centres is available at the
address below:
Peecker Sound - “After Sales Service”
Via Monti Urali, 29 - 42100 Reggio Emilia (Italy)
Tel: +39 0522 557735 - Fax: +39 0522 391268
E-mail: [email protected]
Repair or replacement of the product and its return to the customer are the
only services provided to the customer. Peecker Sound shall not be held liable
to pay incidental or consequential damages including, without limitation,
injury to persons or property or loss of use.
Costs paid by Peecker Sound
Peecker Sound will pay for all labour and material expenses necessary for the
repairs covered by the warranty. Make sure you keep the original packaging;
otherwise, the cost of replacing will be charged to you if necessary. Produce
the original invoice to establish the date of purchase.
Do not send the product to the factory without prior authorization. Should
shipment of the product be a problem, please contact the service centre,
who will deal with it promptly. Otherwise, the customer is responsible for
shipment and handling of the product to be repaired and payment of all
shipping costs.
1. IMPORTANT SAFETY INSTRUCTIONS
This symbol indicates
key operating instructions and
information
requiring particular attention for correct use
of the product.
This symbol warns of
dangerous voltage
and the
consequent risk of electric shock. Take extra care and
proceed with caution.
1. Read carefully all the attached product documentation and keep for
further reference.
2. Heed the warnings.
3. Keep the packaging and check that all the material is in perfect condition.
4. Do not use the product in the vicinity of water or pour water or any
other liquid on the processor. Take care not to use it with wet hands or
with your feet in water.
5. Do not use near sources of heat such as radiators, stoves or other heat-
producing appliances.
6. Check that the power cable is intact and undamaged. Do not tread on
the cable and take care not to put any pressure on the plug.
7. Connect the plug to a properly earthed electric socket. Do not tamper
with the plug. Should the plug supplied not fit your socket, have an
electrician replace it with the correct one.
8. Connect to the mains supply having identical voltage as that indicated
on the back of the processor.
9. Install the processor in compliance with the instructions.
10. Disconnect the appliance in case of storms or when not in use.
11. Wire exclusively as shown in the instructions.
12. Do not remove the upper or lower covers as this would expose the
user to the risk of electric shock.
13. Do not attempt to repair the appliance yourself but always seek the
assistance of qualified technicians.
14. Clean with a dry cloth only.
15. The product must be handled by qualified technicians when:
• the power cable or the plug is damaged
• the product has been exposed to rain or humidity
• liquid has got inside the unit
• an object has fallen on the unit
• the unit has fallen and is damaged
• the appliance seems to be malfunctioning or is showing a marked
change in performance
16. Careful supervision is required if the product is used in the presence of
children or by unskilled adults.
2. DECLARATION OF CONFORMITY
This device complies with the requirements of the
European Electromagnetic
Compatibility Directive 89/336/EEC
(and relevant 92/31/EEC amendment),as
well as the requirements of the
Low Voltage Directive 72/23/EEC
(and relevant
93/68/EE amendment).
Regulations applied:
EN 55 103-1 (
Emissions
)
EN 55 103-2 (
Immunity
)
EN 60065 Class I (
Safety
)
