49
ENGLISH |
MODE 6
– CUSTOMISED
Customised mode (set up according to specific customer
needs)
With this mode, more expert customers are free to decide how to set
the electrical control panel operation by configuring the parameters
as they want.
Factory configuration
Parameter
to be configured
Value
RUN
EMPTYING
SENS L
OFF
IN1
RUN
IN2
RUN
LOGIC
ALTERN.
DRY RUN EN
OFF
DRY LOGIC
COS
COSFI REC
ON
REC TIME
2 min
MAX REC T
60 min
P1
3.0 bar
DP1
0.5 bar
START-UP
To avoid malfunctions due to setting up and operating the equipment incorrectly, read this manual
carefully and follow the instructions before putting the equipment into service.
Prime the pumps (filling and bleeding the air) before starting up the system.
After making all the electrical and plumbing connections correctly, enter the configuration menu to set the correct parame-
ter values for the kind of operation to be performed by the system.
MENU ACCESS COMMANDS
• Press the ON/OFF key to take the control panel OUT OF SERVICE (OFF)
• Press the
+
+
keys simultaneously for 3 seconds
• Press the
or
key to display the various set MENUS
The display will remain in this state for 1 minute, after which it will exit automatically if no other buttons have been
pressed.
The backlighting of the programming menus will
Summary of Contents for E1 MONO
Page 2: ......
