2
Prerequisites
PedigreeTechnologies.com |
Support: (701)-499-0022
CameraView
Required Information
•
Name of asset
(ex: Propane Truck #20)
•
Detailed information about the asset
(year, make, model, VIN, license plate, etc.)
•
State, area, organization, or group the asset belongs to
(ex: North Region, MN tankers, etc.)
•
SN of each device to be installed
(Serial number is found on the top of the unit with a QR code)
Required Equipment
Required Tools
Rubbing Alcohol
(to clean window surface for best adhesion)
Level
(to level camera during mounting)
Camera
Power Module
Before You Begin
TIPS FOR PROPER CAMERA MOUNTING
• Ideal Location: Center (or as close to center as possible) of the windshield.
• Ideal Height: Highest point behind a rearview mirror - in the area swept by the wipers.
• Field of View: Should be clear of any occlustions (EZPass, rear view mirror, etc.)
• Angle: Camera should have a negative pitch angle (it should look “down” a few degrees.)
•
The field of view should not have too much “sky”.
• Split windows may have to adjust mounting location other than what is recommended in this
document. Consult with your implementation manager at Pedigree Technologies.
Tamper Tape
Micro SD Card
Fuse Tap
or
Direct Wire Harness
