PedigreeTechnologies.com | Support: (701)-499-0022
3
Installation Steps, Continued
Installation
AT-130
MOUNT TELEMATICS DEVICE
The telematics device should be mounted with machine screws, bolts or tape to the asset in the
desired location. Use locking nuts
(or loctite)
to prevent shaking loose. (Activate device before
mounting, see instructions on the next page.)
Before You Begin
TURN TO THE LAST PAGE - WRITE DOWN THE REQUIRED INFORMATION!!!
• DO NOT DRILL OR SCREW INTO ROLLOVER PROTECTION STRUCTURES OR FALLING
OBJECT PROTECTION STRUCTURES (ROPS/FOPS)
• DO NOT MOUNT NEAR STRONG MAGNETIC SOURCES
• Decide where to mount device.
• AT-130 can be mounted in the interior of a cab or exterior of the asset.
• Must not be fully enclosed in metal.
• Mount where device is least likely to be damaged.
• Additional hardware may be required.
AT-130
