Pg. 6
Pg. 7
6. Seat Adjustment. Make sure the seat
stem is clamped tight enough so that you
can’t twist it out of alignment. Pull seat
clamp handle away from seat post and
slide seat up or down to adjust. Move
clamp handle inward toward seat post so
post is held tight by clamp.
Tighten clamp if necessary by twisting
the clamp handle clock-wise while in the
unclamped position. Then fold handle in
toward seat post. This should require a
fair amount of force to insure post is held
tight. If necessary, the clamp can be further
tightened with an allen key when in the
clamped position. Make sure seat is not
set with the vertical maximum height marks
above clamps.
7. Pedal Installation – PLEASE NOTE –
THE PEDALS ARE MARKED “L” for Left
and “R” for Right. Using the wrench pro-
vided in the tool kit, attach and tighten the
pedals. The left pedal is attached by turn-
ing it counter clockwise and the right pedal
is tightened by turning it clockwise.
3
8. For comfort cruisers, plug the cord that comes out from underneath the rear rack
into the battery. Turn the key to the “on” position by turning it clockwise.
