Page
20
Warning:
Electric Bikes can be dangerous to use. The user or consumer
assumes all risk of personal injuries, damage, or failure of the
Bicycle or system and all other losses or damages to himself
and others and to any property arising as a result of using the
Bicycle.
For technical or warranty assistance please contact PEDEGO
at 949-336-8333
For replacement parts, contact Pedego at
.
Page
5
6. Seat Adjustment
Make sure the seat stem is clamped tight enough so that you
can’t twist it out of alignment. Pull seat clamp handle away
from seat post and slide seat up or down to adjust. Move
clamp handle inward toward seat post so post is held tight by
clamp.
.
Tighten clamp if necessary by twisting the clamp handle
clock-wise while in the unclamped position. Then fold handle
in toward seat post. This should require a fair amount of
force to insure post is held tight.
Make sure seat and handlebar stems are not set with the
vertical maximum height marks above clamps.
7. Pedal Installation – PLEASE NOTE – THE PEDALS
ARE MARKED “L” for Left and “R” for Right. Using
the wrench provided in the tool kit, attach the pedals.
The left pedal is attached by turning it counter
clockwise and the right pedal is tightened by turning it
clockwise.
