6. Insert a plastic mounting screw anchor in each of
the ¼” holes (4 total).
7. Lower PEDALWORKS
tm
through hole as shown,
and install a mounting screw in each corner.
8. Re-insert pedal and phillips head screw.
9. Loosen bracket bolts so valve will slide up & down,
and front to back. Position the valve in bracket so
that bottom of the pedal is at least 3/4” above the
floor, and the pedal operation is not obstructed by
any part of the cabinet. Firmly tighten bracket bolts.
Page 5
Operating Instructions
Using your PEDALWORKS
tm
Faucet Controller is very
simple. We do suggest you read the following tips and
share them with your family. This will help you get the
most benefits from this technology.
1.
Have the handles on your faucet open to any
desired setting. Step on and off the pedal to
activate water flow at that setting.
2.
Push the latch button in with your foot to latch
the pedal open. You do this when you need
constant flow; as when waiting for the water to
heat up, or running the garbage disposer. Step
on the pedal again, and latch automatically
releases.
3.
When the pedal is latched open you can use
your faucet handles the old fashioned way.
4.
To disable the pedal from being used you can
close the faucet handles.
saves a tremendous amount of hot water.
Tips
Routine Operations in the Kitchen.
When washing your hands, step on the pedal to wet your
hands. Step off while lathering with soap. Step on the
pedal again to rinse. This saves more than 50% of the
water used for hand-washing.
Keep your faucet set for cold water only during the day
and after dinner. When preparing dinner and doing the
dishes, set it for warmer. This keeps you using cold water
most of the time.
When rinsing dishes, generally latch the pedal open long
enough for the water to heat up. Then, step on and off the
pedal as you rinse dishes and load the dishwasher. This
saves a tremendous amount of hot water.
Toe Button
Pedal
Page 8
