background image

43

DOCUMENT THE FOLLOWING INFORMATION FOR FUTURE REFERENCE

SECTION V

Collection system owners should record the name and telephone number of their Service Center. Your Service 
Center will be happy to supply replacement parts, accessories, and do any service or repairs to your collection 
system. If for any reason your Service Center is unable to service your collection system or supply replacement 
parts, contact New PECO, Inc. and include the following information on the chart below. 

 

PARTS & SERVICE

Parts And Service Information

Date of purchase:________/________/_________

Unit  Engine  Size:__________________________________________________

Dealer/Distributor Name:__________________________________________

Address: _________________________________ State:_______ Zip:_______

Unit Serial Number:________________________________________________

Phone Number: ____________________________________________________

Unit Model Number:_______________________________________________

New PECO, Inc.

10 Walden Dr | Arden, North Carolina 28704

Phone: 1-800-438-5823 | 828-684-1234

Email: 

[email protected]

Fax: 828-684-0858

Website: www.lawnvac.com

Summary of Contents for X20 Convertible Trailer Vac















































Reviews: