Wiring instructions
Important -
The mains cable in the appliance cannot be replaced. If it is damaged in any way the
appliance should be discarded.
The
Electrim 75
is fitted with a 13 amp plug with a 3 amp fuse. If the plug has to be removed or
replaced please note the following.
The wire coloured
BLUE
must be connected to the terminal marked
N
or coloured
BLACK.
The wire coloured
BROWN
must be connected to the terminal marker
L
or coloured
RED.
Neither wire should be connected to the terminal marked
E
or coloured
GREEN & YELLOW.
GUARANTEE
The
Electrim 75
immersion heater is guaranteed for one year from date of purchase. If the unit has
to be returned, proof of purchase must accompany it.
The glass tube is not covered by the guarantee. Therefore it is recommended that the tube is carefully
examined prior to use.
The guarantee is void if the immersion heater has been improperly used, mishandled or operated with
insufficient liquid.
No
consequential claims will be accepted.
The unit is factory sealed, any attempt to replace the glass tube or carry out repairs will invalidate the
guarantee.
Peco Services Ltd, Helbeck Road, Brough, Cumbria, CA17 4BG, England
Tel: +44 (0)17683 41111 www.pecoservices.co.uk [email protected]
TEMPERATURE CONVERSION TABLE
15°C
59°F
18°C
65°F
21°C
70°F
24°C
75°F
27°C
80°F
30°C
85°F
32°C
90°F
IMPORTANT SAFETY INFORMATION
• The Electrim 75 should never be switched on before it is immersed in liquid.
• The unit must never be removed from the liquid unless the power is switched off, and the unit
has been allowed to cool for 20 minutes.
• The unit should never be allowed to come into contact with plastic fermenting vessels whilst in
use.
Wiring instructions
Important -
The mains cable in the appliance cannot be replaced. If it is damaged in any way the
appliance should be discarded.
The
Electrim 75
is fitted with a 13 amp plug with a 3 amp fuse. If the plug has to be removed or
replaced please note the following.
The wire coloured
BLUE
must be connected to the terminal marked
N
or coloured
BLACK.
The wire coloured
BROWN
must be connected to the terminal marker
L
or coloured
RED.
Neither wire should be connected to the terminal marked
E
or coloured
GREEN & YELLOW.
GUARANTEE
The
Electrim 75
immersion heater is guaranteed for one year from date of purchase. If the unit has
to be returned, proof of purchase must accompany it.
The glass tube is not covered by the guarantee. Therefore it is recommended that the tube is carefully
examined prior to use.
The guarantee is void if the immersion heater has been improperly used, mishandled or operated with
insufficient liquid.
No
consequential claims will be accepted.
The unit is factory sealed, any attempt to replace the glass tube or carry out repairs will invalidate the
guarantee.
Peco Services Ltd, Helbeck Road, Brough, Cumbria, CA17 4BG, England
Tel: +44 (0)17683 41111 www.pecoservices.co.uk [email protected]
TEMPERATURE CONVERSION TABLE
15°C
59°F
18°C
65°F
21°C
70°F
24°C
75°F
27°C
80°F
30°C
85°F
32°C
90°F
IMPORTANT SAFETY INFORMATION
• The Electrim 75 should never be switched on before it is immersed in liquid.
• The unit must never be removed from the liquid unless the power is switched off, and the unit
has been allowed to cool for 20 minutes.
• The unit should never be allowed to come into contact with plastic fermenting vessels whilst in
use.
Wiring instructions
Important -
The mains cable in the appliance cannot be replaced. If it is damaged in any way the
appliance should be discarded.
The
Electrim 75
is fitted with a 13 amp plug with a 3 amp fuse. If the plug has to be removed or
replaced please note the following.
The wire coloured
BLUE
must be connected to the terminal marked
N
or coloured
BLACK.
The wire coloured
BROWN
must be connected to the terminal marker
L
or coloured
RED.
Neither wire should be connected to the terminal marked
E
or coloured
GREEN & YELLOW.
GUARANTEE
The
Electrim 75
immersion heater is guaranteed for one year from date of purchase. If the unit has
to be returned, proof of purchase must accompany it.
The glass tube is not covered by the guarantee. Therefore it is recommended that the tube is carefully
examined prior to use.
The guarantee is void if the immersion heater has been improperly used, mishandled or operated with
insufficient liquid.
No
consequential claims will be accepted.
The unit is factory sealed, any attempt to replace the glass tube or carry out repairs will invalidate the
guarantee.
Peco Services Ltd, Helbeck Road, Brough, Cumbria, CA17 4BG, England
Tel: +44 (0)17683 41111 www.pecoservices.co.uk [email protected]
TEMPERATURE CONVERSION TABLE
15°C
59°F
18°C
65°F
21°C
70°F
24°C
75°F
27°C
80°F
30°C
85°F
32°C
90°F
IMPORTANT SAFETY INFORMATION
• The Electrim 75 should never be switched on before it is immersed in liquid.
• The unit must never be removed from the liquid unless the power is switched off, and the unit
has been allowed to cool for 20 minutes.
• The unit should never be allowed to come into contact with plastic fermenting vessels whilst in
use.
Wiring instructions
Important -
The mains cable in the appliance cannot be replaced. If it is damaged in any way the
appliance should be discarded.
The
Electrim 75
is fitted with a 13 amp plug with a 3 amp fuse. If the plug has to be removed or
replaced please note the following.
The wire coloured
BLUE
must be connected to the terminal marked
N
or coloured
BLACK.
The wire coloured
BROWN
must be connected to the terminal marker
L
or coloured
RED.
Neither wire should be connected to the terminal marked
E
or coloured
GREEN & YELLOW.
GUARANTEE
The
Electrim 75
immersion heater is guaranteed for one year from date of purchase. If the unit has
to be returned, proof of purchase must accompany it.
The glass tube is not covered by the guarantee. Therefore it is recommended that the tube is carefully
examined prior to use.
The guarantee is void if the immersion heater has been improperly used, mishandled or operated with
insufficient liquid.
No
consequential claims will be accepted.
The unit is factory sealed, any attempt to replace the glass tube or carry out repairs will invalidate the
guarantee.
Peco Services Ltd, Helbeck Road, Brough, Cumbria, CA17 4BG, England
Tel: +44 (0)17683 41111 www.pecoservices.co.uk [email protected]
TEMPERATURE CONVERSION TABLE
15°C
59°F
18°C
65°F
21°C
70°F
24°C
75°F
27°C
80°F
30°C
85°F
32°C
90°F
IMPORTANT SAFETY INFORMATION
• The Electrim 75 should never be switched on before it is immersed in liquid.
• The unit must never be removed from the liquid unless the power is switched off, and the unit
has been allowed to cool for 20 minutes.
• The unit should never be allowed to come into contact with plastic fermenting vessels whilst in
use.