Peco 22651201, Operator'S Manual

Page: 5 / 54

5
Introduction
We are pleased to have you as a PECO customer. Your
collection system has been designed to give you a low
maintenance, simple, and effective way to collect the
grass clippings from your mower. The manuals are
provided to give you the necessary instructions to
properly mount, operate and maintain the collection
system on your mower. Please read this manual
thoroughly. Understand what each control is for and how
to use it. Observe all safety decal precautions on the
machine and noted throughout the manual.
NOTE : All references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
Description
The grass collection system is designed for turf
maintenance where there is a need to collect the grass
clippings as the mower cuts the turf. It is also used for
picking up leaves in pre-season and post-season clean-
up. The blower, mounted on the right side of the unit,
uses a belt and gearbox system from the engine PTO
shaft. Drive train protection comes through belt slippage.
The blower draws grass clippings from the discharge
area of the cutting deck back to the collection bags at
the rear portion of the mower frame. The operator can
engage the blower with a toggle switch mounted on the
control panel to the right of the operator. Once the bags
are full with clippings, they can be easily released for
dumping.
Section I - INTRODUCTION AND DESCRIPTION
Engine Driven Unit Shown Above
Note: Installations for specific units will be specified at the top right of the current section heading or where needed as:
or
Text with instructions for a specific unit will be highlighted, with respect, to the color identified above as such: PTO-X
Drive & . Engine Drive
PTO-X Units may also share similar instructions with the Engine Drive Units. The units sharing the same instructions
will not have any specification under the section heading or highlighted within the text.
PTO-X Engine Drive