Peco 06742408, Operator'S Manual, Page: 5 / 34

5
Introduction
We are pleased to have you as a PECO customer. Your
collection system has been designed to give you a low
maintenance, simple, and effective way to collect the
grass clippings from your mower. This manual is
provided to give you the necessary instructions to
properly mount and operate the collection system on
your mower. Please read this manual thoroughly.
Understand what each control is for and how to use it.
Observe all safety decal precautions on the machine and
noted throughout the manual.
NOTE : all references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
Section I - INTRODUCTION AND DESCRIPTION
Description
The collection system is designed for turf maintenance
where there is a need to collect the grass clippings as
the mower cuts the turf. It is also good for picking up
leaves and twigs in pre-season and post-season clean-
up.
The engine/blower/blade assembly, is mounted on the
right side of the unit. The blower draws grass clippings
from the discharge area of the cutter deck up and back
to the aluminum container mounted over the rear portion
of the mower frame. The operator can engage the
engine/blower/blade assembly by starting the engine.
Once the container is full of clippings, the operator can
easily pull and raise the lift handle. Using the lift handle,
the operator releases the rear door, the container pivots
towards the ground, and the clippings are dumped.
CAUTION
!
To Prevent Damage to the Engine-
Check your Engine Oil Level Before Operation
and Add Engine Oil as directed by
your Engine’s Owner’s Manual