Peco 06742408 Operator'S Manual Download Page 2

2

SECTION                               PAGE

 

Safety  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

 

Safety Alert Symbols  - - - - - - - - - - - - - - - - - - - - - 3

 

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

 

I    INTRODUCTION AND DESCRIPTION

- - - - - - - - - - - - 5

 

Introduction  - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

 

Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

II   INSTALLATION FOR USE

  - - - - - - - - - - - - - - - - - - - - 6

 

Preparation Of Mower  - - - - - - - - - - - - - - - - - - - - 6

 

Battery Cover Preparation - - - - - - - - - - - - - - - - - - 6

 

Rear Main Frame Installation - - - - - - - - - - - - - - -

  

6-7

 

Box Support Frame Assembly  - - - - - - - - - - - - - -

  

8-9

 

Box Support Frame Assembly Installation - - - - - - - - 10

 

Frame Support Brace Installation  - - - - - - - - - - - - - 11

 

Box Assembly Installation - - - - - - - - - - - - - - - - - - 12

 

Box Handle Assembly & Installation - - - - - - - - - - - - 13

 

Dump Mechanism Adjustment  - - - - - - - - - - - - - - - 14

 

Engine Mount Arm Installation  - - - - - - - - - - - - - - - 14

 

Engine/Blower/Blade Installation - - - - - - - - - - - - - - 15

 

Inlet, Inlet Ring & Debris Deflector Installation - - - - - 16

 

Wiring Kit Assembly Installation - - - - - - - - - - - - -

  

17-18

 

Blower Cone Installation - - - - - - - - - - - - - - - - - - - 19

 

Boot Kit Installation - - - - - - - - - - - - - - - - - - - - - - - 19

SECTION                               PAGE

 
 

Length of Hose Adjustment - - - - - - - - - - - - - - - - - 20

 

Upper Hose Installation - - - - - - - - - - - - - - - - - - - - 20

 

Lower Hose To Blower Cone Installation - - - - - - - - - 20

 

Lower Hose To Boot Installation - - - - - - - - - - - - - - 20

 

Impeller Blade Removal / Replacement - - - - - - - - - 21

 

Exploded Views - - - - - - - - - - - - - - - - - - - - - - -

  

22-25

 

Overall Parts Lists  - - - - - - - - - - - - - - - - - - - - -

  

26-28

 

Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 29

   

 III  OPERATING INSTRUCTIONS

- - - - - - - - - - - - - - - - 30

 

General Safety - - - - - - - - - - - - - - - - - - - - - - - - - 30

 

Operation & Tips On Mowing - - - - - - - - - - - - - - - - 30

 

Disengagement Of The PTO Assembly- - - - - - - - - - 30

 

Unloading The Collection System - - - - - - - - - - - - - 30

   I

V  MAINTENANCE

- - - - - - - - - - - - - - - - - - - - - - - -

  

30-31

 

Maintenance Checklist - - - - - - - - - - - - - - - - - - - - 30

 

Lubrication - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31

   

V   PARTS AND SERVICE

  - - - - - - - - - - - - - - - - - - - - - 31

 

Parts And Service Information  - - - - - - - - - - - - - - - 31

 

Torque Specifications - - - - - - - - - - - - - - - - - - - - - 32

 

Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - 33

SAFETY

1.

   Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do 

       not allow anyone who is not acquainted with the Safety Instructions to use your attachment.

2.

   

Know the controls and how to stop quickly. READ THE OPERATOR’S MANUAL!

3.

   

Do not allow children to operate the mower. Do not allow adults to operate the mower or grass collection

       system without proper instruction.

4.

   

Be especially watchful of children and pets darting into the area while operating.

5.

   

Keep your eyes and mind on your unit while mowing or operating your attachment. Don’t let others 

       distract you.

6.

   

Do not attempt to operate your unit or mower when not in the driver’s seat.

7.

   

Always stop unit when emptying the container.

8.

   

Stop unit, shut off deck attachment, set parking brake, shut off mower engine and remove spark plug wire

       before removing clogs, removing or replacing hose, boot, blower cone, or performing any maintenance.

9.

   

If a slope must be ascended, back up the slope; drive forward when descending.

10.

 

It is recommended that the container be kept only half full when negotiating any slopes. Start mowing on 

       slopes when the container is empty and never mow slopes greater than 15 degrees.

11.

 

Inspect your lawn and remove any foreign objects before mowing. Never deliberately run the mower

       across any foreign object.

12.

 

Wear ear protection if the noise level is offensive.

13.

 

Wear eye protection to prevent debris from damaging your eyes.

GRASS COLLECTION SYSTEM

TABLE OF CONTENTS

Summary of Contents for 06742408



































Reviews: