Pebbell PEBBELL v2 User Manual Download Page 31 | Manualshive

Page: 31 / 34

Pebbell PEBBELL v2 User Manual Download Page 31

STARTING PEBBELL 2

30

– www.pebbell-gps.com

Should you accept the estimate, the repair indicated on the estimate will be performed as soon as
possible and the estimate will be free of charge.

The invoice corresponding to the estimate including dispatch costs, which are borne by you, will
be issued at the same time as the repaired PEBBELL GPS device and accessories will be sent to
you.

If you do not accept the estimate or fail to reply in the time-frame of one (1) month, the PEBBELL
GPS device and its accessories will be returned to you without repairing and the cost of the
estimate as well as the cost of dispatching the PEBBELL GPS device and its accessories will be
invoiced as a global and lump sum of fifteen (15) GBP, including tax.

The invoice corresponding to the estimate and dispatch costs will be sent to you at the same time
as the repaired PEBBELL GPS device and accessories.

Limitation of liability

This limited warranty is your only recourse against HoIP Telecom and the only liability accepted
by HoIP Telecom with regard to possible faults in the PEBBELL GPS device and its accessories.

«
...
29
30
31
32
33
...
»

Summary of Contents for PEBBELL v2



































Reviews:

No comments