Peavey VYPYR PRO Operating Manual Download Page 8

Page: 8 / 21

Rear Panel continued

Level Knob

Adjusts the volume level of the MSDI™ going to the soundboard.

Ground Lift Button

Engage this switch if the mix engineer is hearing a hum in the MSDI™ output. This should eliminate the hum by

removing the ground loop.

MSDI™ XLR Direct Out

The MSDI™ XLR output allows direct connection to a soundboard or other audio device.

EFFECTS LOOP SEND

and

EFFECTS LOOP RETURN

1/4” output jack for supplying signals to external effects or signal processing equipment and 1/4” input for re-

turning signals from external effects or signal processing equipment.

MIDI OUT

Sends MIDI preset messages to any external MIDI device.

FOOTSWITCH/MIDI IN

This enables MIDI signals to be recieved from an external MIDI capable device (via 5-pin MIDI cable), and can

also be a means of plugging in the optional Sanpera PRO footswitch (via 8-pin DIN cable). Refer to the Vypyr

Pro MIDI SPEC download on the Vypyr Pro webpage on www.Peavey.com for detailed information on the MIDI

capabilities of the Vypyr Pro.

USB PORT

Allows interaction with a computer. This is important for software updates and operates as an audio source for

recording on computer. This USB port also connects the Vypyr Pro to your computer for use with the Vypyr

Edit program. Vypyr Edit can be found at http://peavey.com/vypyredit

Summary of Contents for VYPYR PRO






















Search results

Summary of Contents for VYPYR PRO

Reviews:

Related manuals for VYPYR PRO

Brands by name

Popular brands

Peavey VYPYR PRO, Operating Manual

Search results

Summary of Contents for VYPYR PRO

Reviews:

Related manuals for VYPYR PRO

Brands by name

Popular brands