FOOTSWITCH
MIDI OUT
(See Owner’s Manual)
from Amplifier
(Control to Amplifier)
MADE IN CHINA
DESIGNED AND ENGINEERED IN U.S.A.
A PRODUCT OF PEAVEY
ELECTRONICS CORPORATION
boost
tap tempo
rec/play
stop
default
assigned
default
assigned
(hold to reset)
(press during playback for overdub)
(hold for tuner)
green = tuner
red = tap tempo
green = play/ovrdub
red = record
model 2
model 3
model 4
delay
reverb
model 1
2
3
4
1
down
up
BANK
PRESETS
MODELS
LOOPER
SANPERA PRO
VYPYR
®
Top Panel
Left Expression Pedal
The default setting for this pedal is for a volume control, but it can be programmed to control any parameter.
Boost Switch
Provides a clean boost to the instrument signal path.
Tap Tempo
Tapping this switch will allow you to set the tempo of the delay effect. Holding the switch down will activate the
onboard tuner.
LCD Display
Displays information about the presets and other parameters.
Looper Controls
These two switches allow for recording, playback and overdubbing through the onboard looper. A complete
description of the Looper feature can be found on page 24.
Right Expression Pedal
The default setting for this pedal is for Wah, but it can be programmed to control multiple parameters.
Model Selectors
These four switches allow you to select one of four models within the Preset.
Bank Selectors
These two switches allow you to scroll through the Vypyr Pro’s Preset Banks.
Preset Selectors
These selectors allow easy access to your favorite presets.
1
6
7
8
9
2
3
4
5
6
1
2
3
4
5
6
7
8
9
