4
Front Panel
(1)
USB port
The USB "B" connector is used to connect a host computer for editing and control using the VSX Editor Program.
(2)
Process Function Buttons
The process-function buttons are used to select a process for editing. Lighted buttons illuminate to indicate they are available
selections. The available functions are different when an input, output or system mode (no input or output selected) for editing.
GAIN:
Used to access channel gain controls
Delay:
Used to access channel Delay controls
COMP:
Available only for output editing, used to access channel compressor/limiter controls.
PEQ:
Used to access channel equalization controls
Xover:
Used to access the low-pass filter and high-pass filter controls.
POLARITY:
Used to access channel polarity normal or invert controls
MATRIX:
Available only for output editing, used to route inputs to outputs.
EXIT:
Exit channel editing.
(3)
Parameter Knob
The parameter knob is used by pressing and rotating to edit processing parameters.
(4)
System Function Buttons
Utility:
Utility functions include setting Unit ID#, IP address, Security Lock and password, input signal or signal generator,
copy channel and Delay units.
Recall:
Used to load saved system presets.
Save
: Used to save system presets.
9
10
10
9
8
8
7
7
6
5
4
3
2
6
5
4
3
2
1
1
