background image

15

LIMITED WARRANTY

     

Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics

product that it is free from defects in material and workmanship. If within one (1) year from date of purchase
a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at
no charge. (Note: Batteries and patch cords not covered.) “Original purchaser” means the customer for whom
the product is originally installed.
     Damage resulting from improper installation, interconnection of a unit or system of another manufacturer,
accident or unreasonable use, neglect or any other cause not arising from defects in material and
workmanship is not covered by this warranty. The warranty is valid only as to products purchased and
installed in the United States and Canada.
     THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE.
UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS,
INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS
LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATE-
MENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING
UPON PEAVEY.
     Peavey’s liability to the original purchaser for damages for any cause whatsoever and regardless of the
form of action is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount
equal to the purchase price of the product that caused the damage or that is the subject of or is directly related
to the cause of action. This limitation of liability will not apply to claims for personal injury or damage to real
property or tangible personal property allegedly caused by Peavey’s negligence. For information on service
under this warranty, call a Peavey customer service representative at (601) 483-5376.

Summary of Contents for UMA 35 T II

















Reviews: