Peavey PBK12FM, Operating Manual

Page: 10 / 12

Overall Dimensions (H x W x D):
23.23" x 14.57" x 12.60"
(590mm x 370mm x 320mm) Net
Weight:
33 Lbs. (15.0 kg)
electronics AnD AMpliFier speciFicAtions:
Internal power amplifier (@120 VAC line):
60
watts peak available power
Continuous Power:
30
watts @ less than 3% THD
Electronic Input Impedance (Nominal):
Line: 10 k ohms unbalanced RCA
Mic: 2.2 k ohms balanced (XLR) No phantom power available.
Input Sensitivity for Full Output (Level full CW):
Line Level – 0.36 V RMS
Mic Level – 0.02 V RMS
Tone Control Corner & Range:
Bass: +/- 12 dB, corner @
100
Hz,
Mid: +/- 12 dB, corner @ 1kHz
Treble: +/- 12 dB, corner @
10
kHz
Nominal Amplifier Frequency Response (before EQ):
+1, -3 dB from 20 Hz to 20 kHz
Hum and Noise:
Greater than 90 dB below rated power
THD and IM:
Typically less than 1 %
Power requirements of Peavey PBK
12 FM
System:
Nominal
50
Watts, 100-120 VAC 50-60 Hz
Fuse Type :
For 110-120 VAC USE: International fuse classification T3.15A
L
cartridge-style 5 x 20 mm size fuses with a 250V
rating can be used.
For 220-240VAC USE: International fuse classification T
1
.
6
A
L
. This is a cartridge style 5 x 20 mm size time-
delay fuse with a 2.0 amp 250V rating.
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • ©2013 • EX000181