3
The new sound of metal is here. The Invective™ 120 is the culmination of nearly three decades of refinements
and tweaks to Peavey’s legendary 6505 series with an all new clean channel and gobs of peripheral features that
are staples for today’s developing musical styles. Designed in close conjunction with Misha Mansoor, of Periph-
ery fame, the result is a monster of an amplifier capable of accurately reproducing tons and tons of the sickest
tube amp tones imaginable….past, present, and future. Three separate channels (Clean/Crunch/Lead) and
two independent input boosts (one for clean, one for high gain channels) give you a sonic palette that lets your
imagination run wild. There’s also a defeatable gate at the input of both gain channels designed to quickly mute
the input for a more “precise” muting characteristic. Capable of 120 Watts of earth shaking power, into the all-
new solid pine Invective 212 (or any standard guitar cabinet), this behemoth can blow the roof off the largest
of venues or….with a twist of the Master Volume and a flip of the half power switch, keep a crowd in the small-
est of clubs. Further tonal mayhem can be accomplished with outboard effects via the footswitchable Effects
Loops. The included 10-button MIDI footswitch allows for switching of all peripheral functions and storage of
presets. We’ve also included an internal MSDI direct analog recording/mic’d output and two auxiliary 9VDC
supply jacks for quick evaluation of pedals or to power a wireless setup. The all new Peavey® Invective™ 120….a
more than worthy successor to the legacy of Peavey’s high gain supremacy.
Features
•
Three channels
•
Preamp gain boost with gain and tone controls on Clean
•
Preamp boost with level and tone controls on high gain channels
•
Input gate on high gain channels
•
Master Volume and Master Boost
•
Resonance and Presence power amp damping controls
•
MSDI direct out with level and tone controls
•
Two Switchable effects loops
•
Footswitch/MIDI In and MIDI Out jack
•
Auxiliary 9VDC supplies
•
120W (rms) into 4, 8, or 16 Ohms (selectable impedance)
•
Half power switch
•
10-button footswitch included
•
Full set of current-based bias test points for easy troubleshooting
ENGLISH
