Peavey D Series Hardware Manual Download Page 31

 

July 7, 2017 

Version 2.0.0.0 

27 

 

PEAVEY ELECTRONICS CORPORATION 
DOMESTIC (USA) LIMITED WARRANTY 
Effective Date: May 1, 2005 

What This Warranty Covers 

This Warranty covers defects in material and workmanship in 
Peavey Commercial Audio products purchased and serviced in the 
United States of America (USA). 

What This Warranty Does Not Cover 

The Warranty does not cover: (1) damage caused by accident, 
misuse, abuse, improper installation or operation, rental, product 
modification or neglect; (2) damage occurring during shipment; (3) 
damage caused by repair or service performed by persons not 
authorized by Peavey; (4) products on which the serial number has 
been altered, defaced or removed; (5) products not purchased from 
an Authorized Peavey Commercial Audio Integrator. This warranty 
does not cover associated costs incurred from servicing equipment, 
including, but not limited to, travel, jobsite-related costs, 
fabrication, freight, loaner equipment, installation, cabling or 
harnessing, mounting materials or other variable costs. 

Who This Warranty Protects 

In applications where the product is sold 

over the counter

, this 

Warranty protects the original retail purchaser. In applications 
where the product is part of an integrated system, and such system is 
warrantied by the integrator as a complete assembly, this Warranty 
protects only the system integrator. 

What Peavey Will Do 

We will repair or replace (at Peavey's discretion) products covered 
by warranty at no charge for labor or materials. If the product or 
component must be shipped to Peavey for warranty service, the 
consumer must pay initial shipping costs. If the repairs are covered 
by warranty, Peavey will pay the return shipping costs. 

How Long This Warranty Lasts 

The Warranty begins on the date of purchase by the original retail 
purchaser or on the date received by the system integrator. (See 

Who 

This Warranty Protects

, above). The duration of the Warranty 

varies by product as summarized below. 

5 Years 

MediaMatrix® DPU cards, NION™ Processing 
Nodes, CABs, I/O cards, Cinema Processors, Power 
Amplifiers, Pre-Amplifiers, Mixers, Electronic Filter 
Sets and Dynamics Processors. 

1 Year 

MM Series Cardframes, MF Series Cardframes, 
ControlMatrix™ Host Processors, Servers and 
Controllers, nControl, nTouch 180, nTouch 60, 
xControl LCDs, nWall, VCAT, VCAT-HD, VGA-2, 
VSC, D4S, D1V, Remote Control Panels, Plates, 
Paging Stations, Ambient Sense Devices and other 
devices installed in user-accessible locations. 

90 Days 

Loudspeaker Components (including speakers, 
baskets, drivers, diaphragm replacement kits and 
passive filter networks.) and all Accessory Products 

How To Get Warranty Service 

End Users: Take the defective product and your dated sales receipt 
or other proof of purchase to your Authorized Peavey Commercial 
Audio Systems Integrator or Authorized Peavey Service Center. 
System Integrators: Ship the defective product, prepaid, to Peavey 
Electronics Corporation, International Service Center, 412 Highway 
11 & 80 East, Meridian, MS 39301, 601-483-5365. Include a 
detailed description of the problem, the name and location of the 
jobsite and a copy of your invoice as evidence of warranty coverage. 
Please include a complete return shipping address. 

Limitation of Implied Warranties 

ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 
THE LENGTH OF THIS WARRANTY. 

Some states do not allow limitations on how long an implied 
warranty lasts, so the above limitation may not apply to you. 

Exclusions of Damages 

PEAVEY'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS 
LIMITED TO THE REPAIR OR REPLACEMENT OF THE 
PRODUCT, AT PEAVEY'S OPTION. IF WE ELECT TO 
REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A 
RECONDITIONED UNIT. PEAVEY SHALL NOT BE LIABLE 
FOR DAMAGES BASED ON INCONVENIENCE, LOSS OF 
USE, LOST PROFITS, LOST SAVINGS, DAMAGE TO ANY 
OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF 
USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, 
CONSEQUENTIAL OR OTHERWISE, EVEN IF PEAVEY HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may 
not apply to you. This Warranty gives you specific legal rights, and 
you may also have other rights which vary from state to state. If you 
have any questions about this warranty or service received, or if you 
need assistance in locating an Authorized Service Center, please 
contact the Peavey International Service Center at (601) 483-5365. 
Features and specifications subject to change without notice. 

 

Warranty statement 

Summary of Contents for D Series

































Reviews: