76
PRESET DEFINITION
Address
Name
Range (Decimal)
(Hex)
00
Model Selection
High nib is Cabinet Model, 0-7
Low nib is Amp Model, 0-7
Clockwise rotation for both nibs:
0 = Red / 2x10
1 = 360 / 1x18
: : :
7 = Freddie K / Alloy 4x10
01
Hardware Control Bits
0-3,7 = <reserved>
4 = Compressor On
5 = Analog Overdrive On
6 = Tweeter On
02
<reserved>
0
03,04
Pre Gain (non-boost, boost)
1-33 (active when Analog Overdrive
enabled)
05,06
Low (non-boost, boost)
1-33
07,08
Mid (non-boost, boost)
1-33
09,0A
Mid Shift (non-boost, boost)
1-33
0B,0C
High (non-boost, boost)
1-33
0D,0E
Post Gain (non-boost, boost)
0-33 (0 = reverb off)
0F,10
<reserved>
0
11,12
Speed/Adj (primary/off, secondary/on)
1-25
13,14
Depth (primary/off, secondary/on)
0-25 (0 = modulation off)
15
Effect Type
0-7 = Chorus, Flanger, Phaser,
Octave, Synth, Fretless, Funk Wah,
Distortion
16
Effect Tweak 1
1-25; 255=no tweak *(see below)
17
Effect Tweak 2
1-25; 255=no tweak *(see below)
18-1D
<reserved>
0
1E
EFX Mode Status Bits (Soft)
High nib is <reserved>
Low nib is EFX mode status:
Bit 0 is Boost (on/secondary = high)
Bit 1 is <reserved>
Bit 2 is Effect On (on = high)
Bit 3 is Effect Alt. (on/secondary = high)
Values are automatically set with effect selection, adjust after to tweak. Available tweaks are shown in table below.
Tweak 1
Tweak 2
Chorus
-
Crossover Frequency
Flanger
Delay Time
Crossover Frequency
Phaser
-
-
Octave
Tone
-
Synth
Frequency
Resonance
Fretless
Frequency
Resonance
Funk Wah
Frequency
Resonance
Distortion
Low Rolloff
Dry Level
All manuals and user guides at all-guides.com
all-guides.com
