PE512X Universal Keyboard
5 ID
setup
It can set keyboard ID,MAC or IP.
5.1 Keyboard
ID
It main use for matrix to judge command source, same matrix can have
multi-keyboard, so it should set ID for different keyboard.
Initialization ID is 0.
5.2 MAC
It should set MAC when Keyboard use for Ethernet, MAC should be different to
other device in Ethernet.
MAC of Initialization is 11-11-11-11-11-11.
5.3 IP
When keyboard in Ethernet, it should set IP, IP of keyboard should be different to
all other device, and it also need to set gateway and subnet mask.
IP of initialization is 192.168.0.1
，
subnet mask: 255.255.255.0
，
gateway:192.168.0.1
。
6 Character
setup
To choose matrix ID, Monitor number of wanted character, then it can set title of
camera to display or mask, time display or mask, and joystick to move position of
character.
It also can control “title renew”, it can renew all camera title output from matrix
according to set of matrix menu.
To choose monitor ID “0”, and to operate all monitor output title of matrix.
“Renew title” will take 4 minutes at most, during this period, matrix without
communication, if longer time, it can not recover, restart matrix.
7 Language
setup
Current version with Chinese and English, after modification, wanted language will
run immediately.
Initialization set of language is English
User operation
After administrator set parameter, user can operate according to requirement.
Log-in
Please refer to description of “User log-in”, to input ID and
password, e.g.ID:1 and password:12345 to go to “NET
matrix.”
To press M1
（
）
or ENTER to confirm, M2
（
）
to cancel current input, M3
（
）
or ESC to cancel all
input.
If ID and password can meet setup, it will go to operation
interface immediately, if not, it will remind ”wrong password”,
and require new password.
If in control mode of PE50
、
PE60
，
it must be on base of