PE512X Universal Keyboard
“001” on above diagram to indicate to choose tour 1.
Park function
To set park time, it will auto call home position, preset or other park action, or cancel park
function.
Patter scan
To input wanted pattern number,
to confirm,
To go to “setup”, then following action of pan-tilt and lens will record as pattern.
When record pattern, generally, it will auto stop record, when record time reach to longest
time, if not, to stop record by manual.
“Run”, just to run current pattern, any command will stop pattern scan.
Menu
to enter into menu, to move cursor by joystick, it can operate
to confirm,
to
cancel or
to exit.
It can run “change, confirm, cancel or exit, etc.” by joystick rotation
（
zoom in/out
）
.
Privacy masking
After going to menu of privacy masking, to input wanted privacy number,
to confirm.
To press
to set masking, after “Start”, then to use joystick to set, “end” to finish setup.
to run current privacy masking
（
it must be valid
）
,
is set to invalid.
Alarm control
Pan-tilt and speed dome can be with alarm function, this item to control some alarm zone
alarm-on, all alarm-on, all alarm-off, it will clear alarm-remind after alarm.
If alarm of matrix being triggered, followings will run in keyboard,
1. alarm indicator on.
2. alarm –remind voice
（
set by administrator in advance
）
.
3. RELAY of matrix will link other device.
After keyboard respond to alarm, to press ACK to recover condition before alarm.
Switch time
To set auto switch time of matrix output
（
MON
）
.
Keyboard should require wanted monitor number, then input time(second), then
press F2(time) to confirm.
Matrix alarm function
As following operation,
Alarm-on/off, it can set alarm on/off to individual alarm zone, input alarm zone ID
before operation.
Alarm group on/off, set alarm on/off to a group of alarm zone, input alarm zone group
ID before operation.
Auxiliary function, to control auxiliary switch open/close of alarm unit (connection with
matrix), and it also can set time from On to Off.
Clear, when alarm being triggered, it will be some clew on monitor, even alarm
disappear, clew still will be on monitor, if user doesn’t want it, it can clear.
Please refer to user manual of matrix and alarm unit for above function.
DVR operation