5
CONNECTIONS
TRIGGER INPUTS – Connect the triggers of your drum pads and cymbals to the appropriate inputs. Use only
standard 1⁄4” TRS cables for multi zone or TS cables for single zone connectors and high quality, shielded
cables to connect to Mimic Pro.
EXT & USB – Use a standard USB cable or thumb drive to connect to the module and add additional sounds.
The EXT RJ45 connection is of future expansion.
MIDI IN/OUT – Use a standard five-pin MIDI cable to transfer MIDI data to and from an external MIDI source.
LINE OUT 1 – 6 – Six balanced TRS outputs.
HEADPHONE JACK – Connection for a pair of stereo headphones or in ears device.
POWER IN – Connect the DC power supply to this terminal. Secure the power cable to the cable clip to
prevent accidental unplugging.
AUX IN – Use a standard TRS cable to connect Mimic Pro to an external analog signal source.
LINE OUT 7–14 –Use a DB25 cable to access channels 7–14.
1.
2.
3.
4.
5.
6.
7.
8.
Rear Panel (where all Mimic PRO connections are made)
TRS Cable
1
2
8
3
4
5
6
7
