Peaq PPA300, User Manual

Page: 31 / 146

ENGLISH 30
Operation
press once more; sound will be muted.
To resume, press again.
3D EMOTION
Press 3D on the remote control to switch the
3D Emotion sound ON or OFF.
LINE IN
Use a 3.5 mm audio cable to connect exter-
nal audio sources via the LINE IN jack.
NOTE: The source of the docking station
is the first priority playback source. Please
remove the iPhone/iPod from the docking
station in order to listen through LINE IN.
START
Press on the device or on the remote con-
trol to switch the appliance on. While the ap-
pliance is on, a white LED is on.
STANDBY
To turn the unit back into standby mode,
press on the device or on the remote con-
trol. While the appliance is in standby, a red
LED is on.
VOLUME
Press + on the panel or VOL+ on the remote
control to increase volume.
Press
- on the panel or VOL- on the remote
control to decrease volume.
PREVIOUS
NEXT
During playback, press to skip to the next
track. After three seconds, to skip to previ-
ous track, press
twice fast. If pressed
once, current track will be played from the
beginning.
PLAY / PAUSE
In stop mode, press once to start play-
back. To pause the playback temporarily,