Peaq PMS300, User Manual, Page: 46 / 230

ENGLISH 45
CD/USB playback
Amplifier unit must be in CD mode to run CD
operation. Use buttons on remote control or
use respective operating elements on the
front panel of the CD Player.
To listen to MP3 or WMA Music Files insert
a USB Stick.
NOTE: Connect the USB device directly
to the USB port of the unit. Using an
extension cable is not recommended and
may cause interference and failure of data
transfer.
EJECT / LOAD A DISC
To open or close the disc tray, press the
OPEN/CLOSE button.
Playback starts automatically from first
track. If there is no disc in the tray or USB
device inserted, the message NO DISC will
be displayed.
PLAY / PAUSE
In stop mode, press once to start playback.
To pause the playback temporarily, press
once more; sound will be muted. To resume,
press
again.
FAST FORWARD
FAST REWIND
During playback, press to fast forward
or to rewind. Press to resume normal
playback.
PREVIOUS
NEXT
During playback, press to skip to the
next track. To previous track, press twi-
ce fast. If pressed once, current track will be
played from the beginning.
STOP PLAYBACK
Press to stop the playback.
TRACK SELECTION
Press the recpective number button 0-9 /
+10
on the remote control.
REPEAT
During CD playback, press REPEAT
repeatedly to activate the following repeat
functions:
– Repeat Title
– Repeat All
– Repeat Off
RANDOM
Press
RANDOM
to play all tracks in random
order.
TIME
Press TIME repeatedly to display:
– Current track / Elapsed time
– Current track / Remaining time
– Total tracks / Elapsed time
– Total tracks / Remaining time