Peaq PMS300, User Manual, Page: 42 / 230

ENGLISH 41
POWER ON/OFF, STANDBY
1 Press power button on Receiver and CD
player to turn each unit on/off.
2 MASTER : Press to turn both CD
Player and Receiver on or into standby.
3 CD : Turn CD player
on or into standby.
4 AMP : Turn Receiver player
on or into standby.
NOTE: During standby mode, a red
indicator light turns on.
The CD player can be turned off if only the
Receiver is used.
1 1
2 3 4
Unscrew the connector screw and run the
cable into the opening under the connector.
Screw down evenly, to lock the cable in
place.
ATTENTION
Make sure the polarity is correct!
POWER SUPPLY
Connect the included supply cords to the
supply cord connector on each unit.
Plug in both appliances.