5.3. Setting CH3 Voltage Output
1. Connect the power supply to the power source.
2. Press the
POWER SWITCH
[1]
to turn on the power supply
3. Press
CH1/CH3 DISPLAY SWITCH
[2] to select display CH3 voltage and current value. When
display CH3 value, the “CH3” icon will on.
4. Press
AUTO CURRENT CUT OFF
PROTECTION KEY
[27] to activate output and the
OUTPUT
INDICATOR
[25]
will on.
5. Use the
CH3 VOLTAGE KNOB
[3] to adjust CH3 voltage to give a desired output voltage.
6. Connect the circuit to the
CH3 TERMINAL
[30, 29].
7. When the
CH3 OVERLOAD INDICATOR
[4] is on, remove some loading on the terminal to
reduce current consumption.
Remarks:
Current output is fixed to 3 A, not adjustable.
Caution:
Make sure the
INPUT VOLTAGE SELECTOR
[33] set to a correct position Otherwise; it will
damage the power supply.
Do not short the MAIN TERMINALS over 1 minute; it will damage the power supply.
-23-
