7
3.2. Operating method
1.)
First connecting the load to the power supply. After the unit is switched on, output voltage
and current will be indicated by LED
2.)
Turning the output voltage adjustment to adjust the voltage
3.)
Using the AC or DC switch to choose the AC or DC
4.)
Pressing on the smoothing switch to get the smoothed DC.
NOTE:
When DC is smoothed, the voltage will be higher than the voltmeter’s value.
CAUTION!
When operating is finished, put it in a dry place of good ventilation, and keep it clean. If it is not in
use for a long period, pull off the power supply plug for storage. For maintenance, input voltage
must be cut off.
If a load of more than 5 A AC/DC connected to the corresponding output of PeakTech
®
6120, the
thermal overload protection will trip and thus switches off the output.
A resetting of the overload protection is possible if the maximum output current is not exceeded.
