Safety precautions
This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) amended by 2004/22/EC (CE-Marking). Pollution
degree 2.
To ensure safe operation of the equipment and eliminate the danger
of serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
*
Do not operate the meter before the cabinet has been closed
and screwed safely.
*
Check test leads and probes for faulty insulation or bare wires
before connection to the equipment.
*
Comply with the warning labels and other info on the equipment.
*
Keep the equipment dry.
*
CAUTION! Repeated sharp flexing can break the thermocouple
leads. To prolong lead life, avoid sharp bends in the leads,
especially near the connector.
*
Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
*
Do not subject the equipment to shocks or strong vibrations.
*
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
*
Keep hot soldering irons or guns away from the equipment.
*
To avoid damage or burns, do not make temperature
measurement in microwaves ovens.
*
Allow the equipment to stabilize at room temperature before
taking up measurement (important for exact measurements).
*
The measurement instrument is not to be to operated
unattended.
-17-
