8
Installation
* Do not place the unit in high humidity, dusty and/or sunshiny
places.
*
Place the unit in a location where allows free air circulation.
*
Do not place the unit close the TV sets or CRT monitor.
*
Couple with an AC outlet directly, as source via distribution
cables may heat plugs and cable.
*
Do not use the unit for the equipment requiring higher current
input than the designed value otherwise damages the unit.
*
Do not use the unit for a lamps or motorised equipment, which
requires high current input at starting and it may damage the
unit.
Connection and operation
1. Make sure that AC power source fits the input of voltage unit
labeled and plug it in the AC outlet.
2. Turn OFF the unit and adjust the output voltage to match with
the input voltage of the equipment.
3. Connect the equipment to the unit. Red (+) is connected to the
positive polarity input of the equipment and Black (-) is
connected to the negative polarity input of the equipment.
4. First turn ON the unit and then turn the equipment ON.
5. When an operation is finished, turn off the equipment first and
then turn OFF the unit.
Introduction
The PeakTech
®
1320 switching power supply is a mini size and
lightweight with characteristic of high efficiency. It is designed to
select 6 DC output voltages (3 V, 4,5 V, 6 V, 7,5 V, 9 V and 12V).
