PeakTech
®
1140
11
4) And return next Display
5) Press “EXIT “ key, if you exit this mode
4.1.3.2 View Memory
Press “2” key ( or Use with “Rotary Encoder “ and “ ENTER “ key ) at “ CONFIG ” mode .
You will show the Saved Memory Number or delete the saved Memory.
1) If you select “ 1.View Save “, then You will show the Saved Memory Number
Default Setting = Save 00 ~ Save 09
2) If you select “2.Delete “ , then you will delete some memory .
( ex -- delete “ SAVE 01 “ )
3) Press “EXIT “ key, if you exit this mode
4.1.3.3 Initialize
Press “3” key ( or Use with “Rotary Encoder “ and “ ENTER “ key ) at “ CONFIG ” mode .
This Equipment is set up by Factory Setting
[VIEW MEMORY]
1.VIEW SAVE 2. DELETE
[VIEW SAVE]
Save00 Save01
[ DELETE MODE ]
Save00 Save02
Save03 Save04
[ INITIALIZE MODE]
!! Initialize In Factory !!
[CONFIG ][ RS-232][ BAUDRATE]
9600
19200
