* Do not subject the equipment to extreme humidity or dampness
* Do not subject the equipment near strong magnetic fields (motors,
transformers etc.)
* Keep hot soldering iron or guns away from the equipment.
* allow the equipment to stabilize at room temperature before taking
up measurement (important for exact measurements).
* do not modify the equipment in any way.
* do not place the equipment face-down on any table or work bench
to prevent damaging the controls at the front.
* opening the equipment and service- and repair work must only be
performed by qualified service personnel.
* Measuring instruments don’t belong to children hands
* Rated environmental conditions:
- indoor use
- installation category III
- pollution degree 2
- altitude up to 2000 Meter
- relative humidity 80 % max.
- ambient temperature 0...40° C
* Observe the international electric symbols listed below:
Meter is protected throughout by double insulation or
reinforced insulation
Warning! Risk of electrical shock
Caution! Refer to this manual before using the meter
-11-
