USB-Connector, User Manual
4
1 Product description
The USB-Connector allows to easily connect a computer to a KNX-network. The included
software is installed on a Windows device that accesses the connected KNX bus via the USB
connector.
The included Bus Monitor and IP Router software enable the user to read or send telegrams
on the KNX bus. The included software also allows the parameterization of actuators via the
Engineering Tool Software (ETS).
The USB-Connector has a compact and robust plastic housing which enables mobile use.
The available connection adapters allow the flexible use of the device.
1.1 Product properties
■
Connections: USB 2.0, type A and D-Sub-9-Pin, male
■
Adapter to KNX (optionally available)
■
Cable length: 65 cm
■
Power supply via USB
■
Included Software: Bus-Monitor, IP-Router and ETS-Integration
■
Extended operating temperature range from -40 ° C to 85 ° C
■
Protection class: IP20 (inhouse use)
1.2 System requirements
■
A USB port on a Windows device
■
Operating system Windows 10, 8.1, 7 (32/64-bit)
■
KNX Bus connection defined in KNX specification
■
Ethernet connection (For the use of the IP Router)
Note:
The USB-Connector only supports Windows as the operating system.PEAKnx does not
guarantee that the software and hardware will function without problems in conjunction with
other operating systems or software.
1.3 Delivery
■
USB-Connector
■
D-Sub-to-KNX-Adapter
ж
KNX-WAGO-243-211-Adapter (optional) (PNX-019-A17-00018)
ж
KNX-WAGO-243-211-Adapter, encapsulated (optional) (PNX-019-A17-00020)
ж
DIN rail (top hat) adapter set* (optional) (PNX-019-A19-00073)
ж
DIN rail (top hat) adapter (optional, as additional purchase option) (PNX-
019-A19-00068)