background image

• 

Do NOT disassemble the Power Inverter. There are no serviceable components within the Inverter.

• 

Do NOT install or operate the Power Inverter in areas designated as IGNITION PROTECTED. The 
Inverter is NOT APPROVED for ignition protected areas.

• 

Always turn the Inverter ON/OFF switch and remote outlet ON/OFF button to the OFF position and 
disconnect the battery cables from the battery or power source when not in use to avoid draining 
the battery. 

• 

Do NOT expose the Inverter to flammables, water, rain or snow.

• 

Use the Inverter in properly ventilated areas only.

• 

Always remove the appliance plug from the AC receptacle before working on the appliance. 

• 

Do NOT insert foreign objects into the AC receptacles.

INTRODUCTION

This Power Inverter can be used to supply power and emergency backup power for household 
appliances and power recreational equipment with a normal power requirement of up to 1200 
continuous watts using a 12-volt power connection.

• 

When using the Power Inverter in a vehicle, check the vehicle’s owner’s manual for maximum 
power rating and recommended output. 

• 

Read and understand this Instruction Manual before using the Power Inverter.

• 

Install and operate the Power Inverter only as described in this Instruction Manual.

FEATURES

Remote Outlet features:

• 

ON/OFF button

• 

Fault indicator

• 

USB power outlet

• 

Power indicator

• 

Two 110/120-volt AC receptacles

Inverter features:

• 

Cooling fan

• 

Positive and negative screw connectors

• 

Battery cables

• 

Power output wattage indicator 

• 

Standard 110/120-volt AC receptacles

• 

ON/OFF switch

• 

USB power outlet

• 

Power/fault indicator

• 

Low voltage shutdown and alarm

• 

Overload and heat protection

• 

Compact design for safer use, transport and storage

• 

Connects to a 12-volt battery or power source

• 

Mounting brackets for hard-wire installation

Summary of Contents for PKC0AW














Reviews: