PCAN-Router FD – User Manual
12
3.2
Supply of External Devices via the D-
Sub Connector
Only product model IPEH-002214 (D-Sub connectors)
On the circuit board of the PCAN-Router FD, a 5-Volt supply can
optionally be routed to each pin 1 of the D-Sub connectors CAN1
and CAN2. Thus, devices with low power consumption (e.g. bus
converters) can be directly supplied via the CAN connector. The
current consumption may not exceed
100 mA
per connector.
Position of the solder fields for the supply of external devices
(for D-Sub connector CAN1 on the left, for CAN2 on the right)
5-Volt supply
D-Sub connector
None
(Default)
Pin 1
CAN1 (left)
CAN2 (right)
