Configuration via the CAN bus with the Windows software PCAN-MicroMod FD
Configuration
Firmware upload via CAN, USB, or RS-232; switchable via 3 buttons
Reset button for restarting the board
Voltage supply 5 V via Micro-USB or barrel connection
Operating temperature range from 0 to 70 °C (32 to 158 °F)
Board 102 x 100 mm with rubber feet
1.2 Operation Requirements
Plugged-in PCAN-MicroMod FD (preinstalled on delivery)
Power supply 5 V DC, either via the provided USB cable or via the barrel connector
(separate power supply unit required)
For the creation and transfer of a configuration:
Computer with Windows 10, 8.1 (32/64-bit) and a PC-CAN interface from PEAK-
System (recommendation: PC-CAN interface with CAN FD capability, e.g. PCAN-
USB FD)
The CAN interface PCAN-USB FD is included with the purchase of the PCAN-
MicroMod Evaluation Kit.
1.3 Scope of Supply “Board” (IPEH-003081)
PCAN-MicroMod FD plug-in board (IPEH-003080)
PCAN-MicroMod FD Evaluation Board (motherboard)
USB cable for power supply
Configuration software for Windows
Manuals in PDF format
1 Introduction
PCAN-MicroMod FD Evaluation Board
User Manual 1.1.0
© 2020 PEAK-System Technik GmbH
6