Peak PCAN-ISA, User Manual, Page: 9 / 25

PCAN-ISA – User Manual
9
The following table shows the possible settings. The X stands for a
set jumper. The default settings at delivery for CAN channels 1 and
2 are highlighted.
Jumper field JP1/JP2
A B C D E
I/O address range
X 200h – 21Fh
X X 220h – 23Fh
X X 240h – 25Fh
X X X 260h – 27Fh
X X 280h – 29Fh
X X X 2A0h – 2BFh
X X X 2C0h – 2DFh
X X X X 2E0h – 2FFh
X X 300h – 31Fh
X X X 320h – 33Fh
X X X 340h – 35Fh
X X X X 360h – 37Fh
X X X 380h – 39Fh
Interrupt
An interrupt (IRQ) must be assigned to each CAN channel. The
PCAN-ISA card supports the interrupts 3, 4, 5, 7, 10, 11, 12, and 15.
The default setting at delivery for CAN channel 1 is interrupt 10, for
CAN channel 2 interrupt 5.
It is possible to share the same interrupt between two existing CAN
channels. Therefore you can configure the same interrupt, when
using two PCAN-ISA cards in the same computer.
Tip: We suggest to configure different interrupts as long as
resources allow it and use interrupt sharing only, if this is not
the case.