PCAN-ExpressCard 34 – User Manual
14
2.
Enter the
ID
, the data
Length
and the CAN message
Data
.
Note:
With the program version 4 of PCAN-View, the DLC field
was renamed to
Length.
Latter reflects the actual data length.
3.
The field
Cycle Time
indicates if the message shall be
transmitted manually or periodically. If you want to transmit
the message periodically, you must enter a value greater
than 0. For a manual-only transmission enter 0.
4.
Confirm the entries with
OK
.
The created transmit message appears on the
Receive/Transmit
tab.
5.
You trigger selected transmit messages manually with the
menu command
Transmit
>
Send
(alternatively Space bar).
The manual transmission for CAN messages being
transmitted periodically is carried out additionally.
Tip:
Using the menu command
File
>
Save
the current transmit
messages can be saved to a list and loaded for reuse later on.
