PEAKnx NET-TV
Operating Instructions
www.peaknx.com
www.peaknx.com
52
53
possible� Thus, it is important that the PEAKnx NET-TV itself can easily separate
wireless networks from other wired networks� While permanently streaming, you
have the choice to decide which of the 5 ports on the built-in switch, should send
the stream�
The PEAKnx NET-TV supports a total of 12 simultaneous streams� Take note: Either
a complete transponder (requires 1 stream) can be streamed or instead just your
favored channels� Each TV channel occupies a single stream�
Some clients are not able to cope with fully streamed transponders� The software
has to split the transponder and the PIDs of the desired program need to be filtered
out in order to enable a proper rendering� Regardless of data or radio channels, the
transponder is streaming just about everything� Eight transponders quickly reach
500 Mbit / s of data, and that is the amount of data what a network permanently
would have to deal with�
There are two other feature that should be noted here only briefly� First it is pos-
sible, if not all streams are configured for multicast, access by Singlecast (eg from
WLAN) on the PEAKnx NETTV� The PEAKnx NET-TV directs a multicast TV channel to
a single-cast participants� Details on that later�
A second possibility is to operate the PEAKnx NET-TV in mixed mode (multicast and
single-cast)� For example, multicast use one or two tuners which are then occupied
and the other tuners running in single-cast mode�
Note:
It is of course possible between multicast and available Singlecast streams at e.g.
with 8 tuners to make an own allocation.
The configuration options for the multicast setup:
In the configuration menu of the PEAKnx NET-TV under
Multicast Setup
various
sample configurations are included� Here once
Astra 19.2
selected�
By
Sample Download
you can download a sample file� Here you can see how the
file is built� By
Select & Enable
a selected entry from the list can be activate�
Through the
Browse
button, a created file will be loaded into the PEAKnx NET-TV and
automatically uploaded and Enable� By
Disable
a running multicast will disabled�
Configuration Example: If the sample file is enabled, 11 streams
normal
assigned and
a stream 10 (Kika) is streamed permanently only on ports 3,4 and 5�
Image 15: Static Multicast Setup
