© 2021-03 PEAK-System Technik GmbH - www.peak-system.com
Gateway 1: Create a Send Route
Gateway 1 is connected to CAN bus A via its CAN channel 1. To transfer the CAN
messages to Gateway 2, you have to create a Send route on Gateway 1.
1
Add Route
Open the configuration website of Gateway 1 and
go to the page
Routing >> Manage Routes.
Click the
button
Add Route.
2
Configure Route
Select
Send: CAN > IP
from the
Choose the direction
drop-down list. Complete the form with the values
from the table below.
Status
Active
CAN
CAN Channel 1 (connected to CAN bus A)
IP Address
192.168.1.202 (address of Gateway 2)
Port
50000
Protocol
TCP
3
Confirm
Click the
Add Route
button at the bottom of the page
to complete the route creation process. After saving,
the route will be displayed in the overview on the page
Routing >> Manage Routes
.