© 2021-03 PEAK-System Technik GmbH - www.peak-system.com
Gateway 2: Create a Receive Route
Gateway 2 has to receive the messages sent by Gateway 1. Furthermore,
the extracted CAN messages, have to be transferred to CAN bus B, which is
connected to CAN channel 2. To make that work, you have to create a Receive
route on Gateway 2.
1
Add Route
Open the configuration website of Gateway 2 in
another browser tab and go to the page
Routing >>
Manage Routes.
Click the
Add Route
button
.
2
Configure Route
Select
Receive: IP > CAN
from the
Choose the direction
drop-down list. Complete the form with the values
from the table below.
Status
Active
Port
50000 (like the Send route)
Protocol
TCP (like the Send route)
CAN
CAN Channel 2 (connected to CAN bus B)
3
Confirm
Click the
Add Route
button at the bottom of the page
to complete the route creation process. After saving,
the route will be displayed in the overview on the page
Routing >> Manage Routes
.