INTRODUCTION
Overview
The FCB4N is a programmable MIDI foot controller that supports all standard MIDI devices. You can save
MIDI messages into the FCB4N with 64 presets memory. The MIDI messages can be transmit by 2 different
PC and 4 CC in a preset.
The FCB4N has up/down bank switches and 4 patches switches with high quality and heavy duty foot switch
that you can feel when pressing on a switch. The body is made by aluminum with black anodize coating and
folded by laser cutting process. It is a compact rugged, simple to use and fully programmable MIDI foot
controller.
TOP Panel
BANK UP/DOWN SWITCH:
This is using for increase bank up or decrease bank down from the current
state. The current bank is start from bank#1 up to bank#32 maximum but
you can program the bank limit for looping.
PRESETS SWITCH:
The FCB4N has 4 patches in a bank as
P1
,
P2
,
P3
and
P4
. You also use
these switches in programming mode for edit, enter, save or cancel
function.
BANK/PROGRAM DISPLAY:
The seven segment display has 2 digits display for showing mode when you
are entering to edit/setting program or display bank number when you are
on operation. The MIDI number is start from 0 to 127 that means the
number would be show from 00 to 2.7. If number is over 99 it would be
show the number with a point.