Page 6
3.
Then, ratchet the mechanism to the right in order to lower the
levelling foot
until it reaches the floor.
Note: There is a switch on the end of the tab. Pressing this will reverse the direction
of the ratchet mechanism, ratcheting to the left will then raise the foot from the floor.
4.
With the foot in position, push the tab back into the ratchet mechanism.
For
MS Bench SCI 1 & SCI 2
proceed to
step 8
.
For
MS Bench G SCI 1 & G SCI 2
, continue following all remaining steps.
