Page 7
Unpack the generator from the shipping crate, referring to the unpacking instruction
located on the outside of the box, and
position on a flat surface
in desired area.
The unit should be left to acclimatize for
3 hours
.
1.
2.
First
remove the compressor transit brackets
.
These can be accessed by removing the generator’s right-hand side and top panels.
Starting with the top panel, use the
4mm Hex Key 3300407
to loosen the
two
cap screws
fixing the top plate to the rear of the generator, then
tilt up and slide
backwards to release the top plate
from the generator.
0°
0°
3300407
Right
Left
