Page 11
10.
9.
00-1282
Connect the
6mm Polyethylene Tubing 00-1282
to the
6mm Push Fit Fitting 02-4600
.
Fit the other end of the tubing to a suitable drain connection or container. The
container MUST NOT have an airtight seal as water and air will be expelled
periodically under a slight pressure. The generator will expel up to 5L per 24 hours
depending on ambient humidity.
Select the appropriate power cable from the fittings kit and
plug the
IEC 60320/C19
cable into the power input
at the rear of the generator.
04-1024/04-1025/04-1026/04-1035
